Shield Nano Molecular Coating

SHIELD Nano Molecular Coating & Enhancer is a high-gloss protective treatment for granite, ceramic, porcelain, and other hard surfaces. It creates an invisible protective coating that enhances color and gloss while helping improve slip resistance, prevent staining, and remove scratches.

SHIELD Nano Molecular Coating & Enhancer is a protective surface treatment developed for granite, ceramic, porcelain, and other hard surfaces.

It uses advanced nano molecular materials and proprietary ingredients to create a high-gloss, invisible protective coating. SHIELD helps improve slip resistance, prevent staining, remove scratches, enhance color, increase gloss, and protect treated surfaces.

Features & Benefits

• Polishes granite, porcelain, and ceramic tile to a high gloss
• Creates a protective layer
• Improves slip resistance
• Removes scratches
• Helps prevent staining
• Enhances surface color
• Increases gloss
• Provides an invisible protective coating

Specs

• Product Code: 2528
• SKU: 2528-29
• Size: 1 Gallon
• Case Pack: 4 × 1 Gallon
• UPC: 752610125283
• Color: Colorless
• Odor: Odorless
• pH (Concentrate): 2.5 ± 0.5
• Solubility: Disperses
• Specific Gravity: 1.08 ± 0.01 g/cc
• Freeze-Thaw Stable: Yes
• Flash Point: None
• Biodegradable: Yes
• Shelf Life: Minimum 1 year in original unopened container
• Case Weight: 37.00
• Case Dimensions: 12″ L × 12″ W × 12″ H
• Cube: 1.13
• Layer / Pallet: 12 / 60

Directions for Use

Remove any sealers or coatings from the floor before application.

For best results, use a weighted 175 RPM floor machine with a total weight of approximately 140 lbs.

1. Vigorously shake the SHIELD bottle to thoroughly blend the product and achieve an even consistency.
2. Pour a small circle approximately 4 inches in diameter onto the surface.
3. Place the floor machine fitted with a dense natural hair pad over the product.
4. Polish slowly using a side-to-side motion.
5. Buff an area of approximately 9 sq. ft. (1 sq. meter) until the product has dried.
6. Repeat the process, adding more product as required, until the desired gloss is achieved.
7. Rinse the floor with clean water and vacuum up all remaining residue.

For ceramic and porcelain tile, follow the same procedure and make sure the surface is completely dry and polished before allowing foot traffic.