One Step Crystallizer Spray N/ Buff
ONE STEP™ Crystallizer Spray N’ Buff is a stone floor restoration system for marble, terrazzo, and polished limestone. Its simple spray-and-buff application restores a high natural gloss while providing excellent scuff and scratch resistance, with no messy clean-up required.
$24.00
ONE STEP™ Crystallizer Spray N’ Buff is a simple-to-use restoration system developed for marble, terrazzo, and polished limestone floors.
It produces a high polish while creating a durable restored surface that resists scuffs and scratches. The product dries during buffing, eliminating messy clean-up after application. It provides a natural shine without the need for a coating, allowing the natural appearance of the stone to stand out.
Features & Benefits
- Simple spray-and-buff system – Restores gloss with quick and easy application
- Excellent scuff and scratch resistance – Helps protect floors from daily wear
- Produces an impressive natural shine – Allows the stone’s natural beauty to stand out
- Preferred alternative to coatings
- Dries as you buff
- Helps reduce labor time
- Creates a durable restored surface
Specs
- Product Code: 2501
- Product Type: Vitrification Compound
- Available Sizes: 32 oz (1 Qt.), 1 Gallon
- 32 oz SKU: 2501-36
- 32 oz Case Pack: 12 × 32 oz (1 Qt.)
- 32 oz UPC: 752610925012
- 1 Gallon SKU: 2501-29
- 1 Gallon Case Pack: 4 × 1 Gallon
- 1 Gallon UPC: 752610125016
- Appearance: Opaque Liquid
- Odor: Mild, Bland
- Specific Gravity: 1.08 ± 0.01 g/cc
- pH (Concentrate): 2.3 ± 0.2
- Flash Point: None
- Safe on Stone: Yes
- Scuff Resistance: Excellent
- Scratch Resistance: Excellent
- Increased Gloss: Outstanding
- UL Classified: Yes
- Coverage: Approximately 2,000–5,000 sq. ft. (185–465 sq. m.) per gallon
- 32 oz Case Weight: 27.00
- 32 oz Case Dimensions: 14″ L × 11″ W × 11″ H
- 32 oz Cube: 0.94
- 32 oz Layer / Pallet: 11 / 55
- 1 Gallon Case Weight: 37.00
- 1 Gallon Case Dimensions: 12″ L × 12″ W × 12″ H
- 1 Gallon Cube: 1.13
- 1 Gallon Layer / Pallet: 12 / 60
Directions for Use
Surface Preparation
The surface must be clean and dry. Make sure all waxes, floor finishes, and other coatings have been completely removed.
After removing any existing coating, rinse the surface thoroughly with water and allow it to air dry before crystallization.
Worn or damaged surfaces may require resurfacing before crystallization. Cover sensitive surfaces such as metal, glass, and carpet to protect them from overspray.
Application
Use a 175 RPM floor machine designed for crystallization, weighing approximately 130–180 lb, and equipped with a #0 or #1 grade steel wool pad.
Apply ONE STEP™ using a trigger spray bottle at a rate of 2–3 squirts per square yard (0.836 sq. meter).
Immediately buff the treated area until the surface is completely dry. Buff in both directions until the desired gloss is achieved.
ONE STEP™ provides approximately 2,000–5,000 sq. ft. (185–465 sq. m.) of coverage per gallon.
Shake lightly before use.
Because marble and limestone are natural materials and can vary in composition, always test ONE STEP™ on a small, inconspicuous area before full application.
