Sani Quat Disinfectant Sanitizer Deodorizer

SANIQUAT is a highly concentrated, multipurpose disinfectant, sanitizer, and deodorizer featuring a dual-chain quaternary ammonium chloride formula. It provides broad-spectrum disinfection and economical dilution rates, with no-rinse sanitizing at specified dilutions.

SANIQUAT is a highly concentrated, multipurpose disinfectant, sanitizer, and deodorizer designed for a wide range of disinfecting and sanitizing applications.

Its dual-chain quaternary ammonium chloride formula can be used as a no-rinse sanitizer, disinfectant, and deodorizer. The concentrated formulation provides economical dilution rates for various cleaning and sanitizing procedures. SANIQUAT is also listed on the EPA List N for use against SARS-CoV-2.

Note: Not for sale or use in California.

Features & Benefits

• Multipurpose formulation – Provides cost-effective use across a wide range of procedures
• High use dilutions – Provides economical use for sanitizing and disinfection
• Broad-spectrum kill – Helps control bacterial contamination
• No rinse at specified dilutions – Saves labor while providing effective sanitization
• Suitable for use as a disinfectant, sanitizer, and deodorizer
• Dual-chain quaternary ammonium chloride formula

Specs

• Product Code: 0125
• SKU: 0125-29
• Size: 1 Gallon
• Case Pack: 4 × 1 Gallon
• UPC: 752610101256
• pH (Use Dilution): 7.0 ± 1.0
• Specific Gravity: 0.99 ± 0.01 g/cc
• Density: 8.26 ± 0.1 lbs/gal
• Color: Colorless
• Odor: Slight detergent, characteristic
• Upper Cloud: >140°F
• Lower Cloud: <30°F
• Flash Point: Not available
• Freeze-Thaw Stable: Yes
• Hard Water Stable: Yes
• Staining: No
• Irritating: No
• Bactericidal: Broad Spectrum
• Virucidal: Excellent
• Disinfecting: Excellent
• Deodorizing: Excellent
• Sanitizing: Excellent – No Rinse
• Shelf Life: Minimum 1 year in original unopened container
• Case Weight: 37.00
• Case Dimensions: 12″ L × 12″ W × 12″ H
• Cube: 1.13
• Layer / Pallet: 12 / 60

Directions for Use

Hospital & General Disinfection

Pre-clean visibly soiled areas.

Dilute 1.5 fl oz of SANIQUAT per gallon of water. Apply to hard, non-porous surfaces using a sponge, brush, cloth, mop, or suitable spray device.

For spray applications, spray approximately 6–8 inches from the surface.

Keep treated surfaces visibly wet for:

• 1 minute to kill viruses listed on the label
• 10 minutes to kill all organisms listed on the label

Wipe dry or allow to air dry. Food-contact surfaces must be rinsed with potable water after disinfection. Prepare a fresh solution daily or whenever it becomes visibly dirty.

Food Contact Surface Sanitizing

Pre-clean and wash surfaces before sanitizing.

Dilute 1 fl oz per 4 gallons of water (0.25 fl oz per gallon). Immerse or thoroughly wet pre-cleaned food-contact surfaces for at least 1 minute.

Allow surfaces to drain adequately and air dry before contact with food. Do not rinse.

General Cleaning & Deodorizing

For general cleaning and deodorizing, dilute 0.5 fl oz per gallon of water and apply to hard, non-porous surfaces. Rinse or allow to air dry.

For heavy-duty cleaning, dilute 1.5 fl oz per gallon of water. Food-contact surfaces must be rinsed with potable water after use.